Guides › Fabric & Quality
Why cotton tees shrink, and how a good factory controls it so your custom order fits after washing.
Shrinkage is one of the quietest ways a clothing order goes wrong. The tee looks perfect on the sample, then a customer washes it once and the fit is off. For a custom clothing brand, that means returns, complaints and a damaged reputation — all from a problem that a good factory controls before the fabric is even cut.
The good news is that shrinkage is not a mystery. It is measurable, predictable, and largely controllable if the fabric, the test and the care label are aligned. The key is to treat it as a specification, not an afterthought.
Cotton is a natural fiber, and its fibers tighten and contract when they absorb water and heat. Most of the shrinkage happens on the first wash and dry. That is why the raw fabric you start with is not the fabric your customer ends up wearing — the difference is shrinkage, and it has to be accounted for in the pattern and the cutting.
Shrinkage usually shows up as length rather than width, because a knit stretches more along its length. That is why a tee often comes out shorter after the first wash while the chest stays close to spec. Knowing this helps you and the factory measure the right places.
| Control | What it does |
|---|---|
| Pre-shrunk / compacted fabric | Removes most shrinkage before cutting |
| Knit tension control | Limits how much the fabric can still move |
| Shrinkage testing | Confirms the real percentage on the actual fabric |
| Pattern allowance | Sizes the garment so it measures right after washing |
A factory measures the fabric or garment before washing, washes it under a defined method, then measures it again. The change, expressed as a percentage, is the shrinkage. The test method matters: a cold gentle wash gives a different result from a hot tumble dry. That is why the tested method has to match the care label, or the customer's real-world wash will shrink the tee further than the factory predicted.
Do not just ask for "pre-shrunk". Ask the factory for the shrinkage test result on the actual fabric, and confirm what the measurements will be after washing. The care label should then match the tested wash method — if the factory tests cold wash but the label says tumble dry hot, the customer can still shrink the tee at home.
Alongside shrinkage, fabric relaxation and knit structure also change fit after washing. A well-made tee should return to shape after wash and wear. That is why the sample stage matters: it is where fabric, shrinkage, fit and care instructions all get locked together before you commit to bulk.
One mistake is assuming "pre-shrunk" means "no shrinkage at all" — it means the worst of it has been removed, not that the tee is immune. Another is changing the care label at the last minute without re-testing. And a third is measuring the sample only when new, instead of washing the sample the way the customer will. Each of these quietly reintroduces the problem the factory already worked to remove.
For more on this, read our pre-shrunk fabric guide, the combed vs carded cotton comparison, or see our custom heavyweight t-shirts. For the weight side, check the garment GSM guide.
Cotton fibers tighten and contract when they absorb water and heat. The first wash causes most of the shrinkage, which is why factories pre-shrink fabric and test shrinkage before cutting.
Factories use pre-shrunk or compacted fabric, control the knit tension and the washing and drying process, and confirm shrinkage on a sample before bulk production.
With pre-shrunk fabric and correct wash guidance, shrinkage should be small and consistent. The exact percentage depends on the fabric and construction, which is why it should be confirmed on a sample.
No. Pre-shrunk means most of the shrinkage has been removed, not that the garment is immune. The care label should still match the tested wash method so customers wash it the way it was tested.
Yes. Wash and dry the sample the way your customers will, then measure it against the spec. This catches a care label mismatch before it reaches your customers.